CLARK'S Coconut Cutting Board Oil - Highly Refined Coconut Oil

CLARK'S Coconut Cutting Board Oil is formulated using 100% natural refined coconut oil that is food safe! Renewable, sustainable, and just plain good for our planet!

Our coconut oil was designed with all of the things you want in a cutting board oil, and none of the things you don't. Kitchen surfaces and tools take a beating.

Between sharp knives, water, soap, and temperature fluctuation, wood begins to dull, warp, and show wear. This is when a good coconut conditioning oil is needed.

Our coconut oil was specially formulated to have a very low viscosity so that it can be used for all of your wooden kitchen items without ever going rancid like other plant based oils.

Why You'll Love It?

Penetrates Deep into the Wood

Apply a generous amount of oil evenly to the wood surface and allow it to penetrate for 1-2 hours. Make sure you oil all sides. Oil works its way deep into the grain of your wood surfaces.

100% Natural Refined Coconut Oil

An unscented plant based oil with no extra additives or preservatives.

Prevents Drying and Cracking

Oiling cutting boards or butcher blocks every 3-4 weeks helps prevent wood from drying, splitting or cracking.

Food Safe and Antimicrobial

CLARK'S Oil will never go rancid or harbor germs like other oils. Safest butcher block oil on the market & exceeds United States FDA regulations on safety for direct and indirect contact with food.

What Products Is This Safe To Use On?

Butcher blocks need a VERY low viscosity oil that penetrates deep because of the thickness of the wood

Hardwood counter tops and islands are not only provide a stunning look to your kitchen, they are functionally magnificent and will continue to wow with regular care

Maintain your often overlooked wooden utensils, salad bowls, serving trays and pizza peels.

Terrific for bamboo cutting boards, serving trays, utensils, drawer organizers, bowls, well...you get it, anything bamboo.

Cutting Board Care

Step 1 – CLEAN

• Wet cutting board on all sides in the sink
• Apply CLARK'S Cutting Board Soap to one side of board
• Use CLARK'S Scrub Brush or similar brush to scrub soap until a rich lather forms
• Clean all sides of cutting board
• Rinse board with warm water
• Dry board with a towel

Step 2 – PRESERVE

• After board has sufficiently dried apply CLARK'S Cutting Board Oil to surface of wood
• Rub oil into cutting board without spreading too thin
• Coat all sides evenly (rest cutting board on a plate to help keep your counter clean)
• Allow oil to penetrate wood for 1-2 hours (If applying oil to new untreated wood, repeat above oiling steps several times over a 24-hour period)
• Wipe off any excess oil with a paper towel

Step 3 – PROTECT

• Apply a small amount of CLARK'S Cutting Board Wax Finish to surface of wood
• Use CLARK'S Applicator or paper towel to coat all sides of wood in a thin layer of wax
• Allow wax to penetrate wood for 20-30 minutes
• Using CLARK'S Buffing Pad or paper towel, buff off any excess wax
• CONGRATULATIONS! Your wood is now Food-Safe and ready to use